ON ANDROID? Use the flasher built into Wardrive Go for the best experience. One tap, both chips on a Biscuit, all automatic.
Get it on Google PlayWardriveESP
The one-board ESP32 Wi-Fi and Bluetooth scanner for Wardrive Go on iPhone and Android. It streams every network it hears to the app over Bluetooth. No pairing, no setup, no terminal.
Flash it from your browser
- Plug an ESP32-C3, C5, C6 or S3 into a computer over USB.
- Open this page in Chrome or Edge on that computer.
- Hit the button and pick the board's port. It detects the chip and flashes the right build in about a minute.
Biscuit Pro or Ultra? It has two chips and two ports. Flash either one and the page asks for the other.
One click updates a board you flashed here before.
- Power the board. In Wardrive Go turn the Wi-Fi bridge on — it links by itself.
Already on 1.2 or newer? Updates install from Wardrive Go over Bluetooth — the app tells you when one is out. Boards on 1.1.1 or older need this USB flash once.
Supported boards
As an Amazon Associate, RocketGod earns from qualifying purchases.
What's new
Or flash it yourself
Unzip, pick your chip's folder under firmware-bins/, then (replace <chip> and <PORT>):
esptool --chip <chip> -p <PORT> erase_flash esptool --chip <chip> -p <PORT> -b 460800 write_flash 0x0 wardrive-bridge-merged.bin
Biscuit Pro or Ultra second chip (the ESP32 on the CH340 port): grab wardrive-coproc-merged.bin, flash it, then send WDCP setboard biscuit_ultra (or biscuit_pro) on that port at 115200.
esptool --chip esp32 -p <CH340 PORT> -b 460800 write_flash 0x0 wardrive-coproc-merged.bin
For help, find RocketGod in the Wardriving channel at https://discord.gg/thepirates — "The Pirates' Plunder".