{
  "latest": "1.7.8",
  "date": "2026-11-11",
  "releases": [
    {
      "version": "1.7.7",
      "date": "2026-11-05",
      "notes": [
        "ESP32-S3 boards stay linked on phones that tune the link right after connecting (like OnePlus), instead of dropping about 45 seconds in"
      ]
    },
    {
      "version": "1.7.6",
      "date": "2026-11-03",
      "notes": [
        "Offline runs copy to the phone much faster and no longer stall when lots of boards are linked",
        "Runs on the card are offered every time a phone links, even right after power-up",
        "Offline runs need GPS, and boards without a fix show NO GPS FIX",
        "Boards keep scanning when capture is short on memory, and capture starts as soon as there's room",
        "Screens show In Range beside Sent or Saved, bolder small text, runs waiting on the card, and stay at full brightness",
        "A card can be formatted from the Terminal with sd format yes"
      ]
    },
    {
      "version": "1.7.5",
      "date": "2026-10-31",
      "notes": [
        "Offline runs: boards with a microSD card and GPS save a run to the card whenever no app is linked, then hand it to the app on the next link",
        "Board screens show SAVING TO SD while offline and a live transfer screen while sending runs to the phone",
        "GPS on the Marauder Mini v3 and Koko V8"
      ]
    },
    {
      "version": "1.7.4",
      "date": "2026-10-30",
      "notes": [
        "Board screens show a live firmware update screen while updating: progress ring, percent and a keep power on reminder"
      ]
    },
    {
      "version": "1.7.3",
      "date": "2026-10-29",
      "notes": [
        "AWOK Dual C5 support: color screen and GPS on its screen chip (the white port)",
        "Board screens show alerts in the same color as the app's banner and LEDs",
        "Other phones now see each board's type, battery, second radio and channels",
        "A board you let go in the app links to the next phone right away"
      ]
    },
    {
      "version": "1.7.2",
      "date": "2026-10-29",
      "notes": [
        "Fixes capture not starting on some boards (stuck at 0 APs) after 1.7.1"
      ]
    },
    {
      "version": "1.7.1",
      "date": "2026-10-29",
      "notes": [
        "Accurate AP counts in capture mode and on board screens: APs in range now, plus the session total"
      ]
    },
    {
      "version": "1.7.0",
      "date": "2026-10-28",
      "notes": [
        "Color screens on the Koko Marauder V8 and Marauder Mini v3: live dashboard and app alerts",
        "Experimental Wi-Fi radar mode on ESP32-C5 and C6 boards"
      ]
    },
    {
      "version": "1.6.9",
      "date": "2026-10-26",
      "notes": [
        "Steadier links on big clusters: boards answer the phone first, then run the command, so links no longer drop when lots of boards are busy."
      ]
    },
    {
      "version": "1.6.8",
      "date": "2026-10-25",
      "notes": [
        "Biscuit Pro and Ultra: the second chip now scans 2.4 GHz Wi-Fi alongside the main radio for more finds, with Bluetooth Classic and Off as options on the board card."
      ]
    },
    {
      "version": "1.6.7",
      "date": "2026-10-25",
      "notes": [
        "Biscuit Pro and Ultra support: the app now flashes both chips inside with one tap, and the battery level shows on the board card again.",
        "The Biscuit Pro and Ultra name themselves in the app, and the Pro's LED flashes the app's alerts."
      ]
    },
    {
      "version": "1.6.6",
      "date": "2026-10-24",
      "notes": [
        "Fixes the crash some boards hit a few seconds after starting up, most often right after flashing or a USB reset.",
        "Plugged into your phone over USB, the board now runs on USB only and turns Bluetooth off. Bluetooth comes back when you unplug.",
        "Biscuit Crumb support: the LED ring glows with the battery level when idle, plays a rainbow when a phone connects, and flashes the app's alerts like police, trackers and drones.",
        "Rabbit Labs Poltergeist support: the screen shows live APs, channels and link status, and flashes the app's alerts."
      ]
    },
    {
      "version": "1.6.5",
      "date": "2026-10-23",
      "notes": [
        "Every phone nearby now sees every board, who it's linked to, and its mode, temperature and AP count.",
        "A board in use on another phone shows as taken instead of failing to connect."
      ]
    },
    {
      "version": "1.6.4",
      "date": "2026-10-22",
      "notes": [
        "Fixes a rare crash when a phone connects the moment a board powers on.",
        "New terminal commands: link shows what the board is connected to, and drop disconnects it so another phone can link.",
        "Removed the status LED setting. It never worked on most boards."
      ]
    },
    {
      "version": "1.5.5",
      "date": "2026-10-19",
      "notes": [
        "Scans every channel the board can tune: 2.4 GHz 1–14 and 5 GHz 36–177."
      ]
    },
    {
      "version": "1.5.3",
      "date": "2026-10-16",
      "notes": [
        "Fixes ESP32-S3 boards restarting every few seconds right after linking.",
        "If a board ever crashes, Wardrive Go’s Diagnostics now shows why."
      ]
    },
    {
      "version": "1.4.0",
      "date": "2026-10-12",
      "notes": [
        "GPS: a board with a UART GPS receiver streams its position to Wardrive Go when the phone's own fix is stale or unavailable."
      ]
    },
    {
      "version": "1.3.1",
      "date": "2026-10-09",
      "notes": [
        "The startup report now records the last boot's progress correctly."
      ]
    },
    {
      "version": "1.3",
      "date": "2026-10-09",
      "notes": [
        "Bluetooth mode: with two or more boards linked, tap MAKE BT on one and it scans Bluetooth instead of Wi-Fi. The other boards keep Wi-Fi and share the channels.",
        "Bluetooth devices are reported with their real addresses, so they count when you upload.",
        "New terminal command: bt on / bt off."
      ]
    },
    {
      "version": "1.2.2",
      "date": "2026-10-09",
      "notes": [
        "Boot report: on every connect the board tells the app its firmware, slot, last reset reason and whether an update was rolled back.",
        "If freshly updated firmware doesn't start within 30 seconds, the board restarts and goes back to the previous version on its own.",
        "info also shows the boot report."
      ]
    },
    {
      "version": "1.2.1",
      "date": "2026-10-09",
      "notes": [
        "Terminal commands in Wardrive Go: help, info, status, ch, led, reboot. Unknown commands show the list.",
        "led off keeps the status light dark, and the setting survives reboots.",
        "Installs over Bluetooth on boards already running 1.2."
      ]
    },
    {
      "version": "1.2",
      "date": "2026-10-09",
      "notes": [
        "Firmware updates install over Bluetooth from Wardrive Go â€” one tap, no computer.",
        "New flash layout: boards on 1.1.1 or older need one USB flash to reach 1.2. After that, updates come over Bluetooth.",
        "If a new version fails to start, the board rolls back to the previous one."
      ]
    },
    {
      "version": "1.1.1",
      "date": "2026-10-09",
      "notes": [
        "The terminal's AP count shows the APs heard in each sweep."
      ]
    },
    {
      "version": "1.1",
      "date": "2026-10-09",
      "notes": [
        "ESP32-C5 scans 5 GHz (channels 36â€“48 and 149â€“161) as well as 2.4 GHz.",
        "Several boards can link at once; the app splits the channels between them.",
        "Each board has its own name."
      ]
    },
    {
      "version": "1.0",
      "date": "2026-10-05",
      "notes": [
        "First release: 2.4 GHz Wi-Fi scanning streamed to Wardrive Go over Bluetooth."
      ]
    }
  ],
  "coproc": "0.2.1",
  "coproc_parts": [
    {
      "at": "0x1000",
      "file": "wardrive-coproc-bootloader.bin"
    },
    {
      "at": "0x8000",
      "file": "wardrive-coproc-partition-table.bin"
    },
    {
      "at": "0x10000",
      "file": "wardrive_coproc.bin"
    }
  ]
}
